The Black Line cabinets
1 x 12 Black Line cabinet
The Whiskey 1x12" cab has "The Whiskey Finish" with black and silver aesthetic and can be used as an extension for your amp of choice. This small 1x12" has a deep body and will give you the feel and tone of a much larger cab.
At the heart of this Whiskey cab is a Celestion G12H75 Creamback, which offers the sonic signature of a G12H combined with Creamback levels of power handling.
The G12H75 Creamback speaker provides a tight low end with a punchy and dynamic high end. This speaker perfectly mates the Whisky amp with focus, body and girth while maintaining the classic Creamback tone. It thickens single notes, resulting in a highly articulate and vocal character.
The Whiskey 2x12 cab is designed especially for the large low-end capabilities of the 65amps Whiskey head and sounds huge. If youre looking for the authority of a 4x12 in a smaller package, look no further. The Whiskey 2x12 is also a great accompaniment for any 65Amps standard size amplifier heads. This cab features a tuned horizontal port in the rear to maximize efficiency and punch, and is the favorite of touring pros and studios around the world.At the heart of this cab are two Celestion G12H30 speakers famous for their ability to recreate the classic sounds of 60's and 70's rock. With a strong, aggressive low-end and powerful low-mids, the G12H penetrates any mix with an attacking upper mid-range and an ice-cool top- end.These speakers provide serious attitude to soft amp tones, easily cutting through loud stage levels for chord work, and imparting a hard edge to single notes and is a perfect compliment to the heads.
Like the Blue and Red Line guitar cabinets of 65 Amps, the Black Line cabinets normally have an impedance 16Ω as well . Y ou can of course always look on the tag that should be on the speaker to tell you what the impedance is. When in doubt you can easily measure the impedance of your cabinet with the help of a multimeter and your TS speaker cable (TS stands for tip - sleeve). Insert your TS speaker cable in the cabinet and measure on the other end of the cable with your multimeter (set to Ω) the impedance across the tip and the sleeve. The multimeter only measures resistance (not impedance). Please remind that the multimeter, set on resistance, will therefore always measure lower than the impedance of the speaker. If you measure a speaker that is 16Ω, you will measure anywhere between 10Ω and 14Ω. An 8Ω speaker will measure approximately between 5Ω to 7Ω and a 4Ω speaker will measure around 2Ω to 3Ω. Impedance always measures a lower resistance than the rated impedance.
1 x 12 cabinet: 21.5"W x 12.75"D x 18.5"H
Weight: 47 lbs
2 x 12 cabinet: 27.75"W x 10"D x 21.75"H
Weight: 55 lbs
List price back in the days (2014):
1 x 12 cabinet: $ 495.00
2 x 12 cabinet: $ 795.00
1 x 12 Black Line cabinet backside (Celestion G12H75 Creamback)
2 x 12 Black Line cabinet
2 x 12 Black Line cabinet backside (Celestion G12H30)